|
Sturdy, high-tensile aluminum vise for tuning all types and shapes of skis
Secure the vise to a sturdy table or solid work surface. The supports should be spaced so they provide support while not allowing the ski to over flex.
Using the supplied brake retainers, secure the brakes in the up position. Place the ski on the supports and center it from side to side. For additional security, clamp the smaller black clamp to your bench or work surface under the toepiece. Place the rubber triangle around the toe piece and hook to the clamp.
For working on the side edge, lift and turn the ski 90 degrees, keeping the base away from you, and place into the center jaws.
|
